Findmall 6 Lockdown Milling Machine Vise Bench Vise With Swiveling Base Lock Vice

Findmall 6 Lockdown Milling Machine Vise Bench Vise With Swiveling Base Lock Vice
Findmall 6 Lockdown Milling Machine Vise Bench Vise With Swiveling Base Lock Vice
Findmall 6 Lockdown Milling Machine Vise Bench Vise With Swiveling Base Lock Vice
Findmall 6 Lockdown Milling Machine Vise Bench Vise With Swiveling Base Lock Vice
Findmall 6 Lockdown Milling Machine Vise Bench Vise With Swiveling Base Lock Vice
Findmall 6 Lockdown Milling Machine Vise Bench Vise With Swiveling Base Lock Vice
Findmall 6 Lockdown Milling Machine Vise Bench Vise With Swiveling Base Lock Vice
Findmall 6 Lockdown Milling Machine Vise Bench Vise With Swiveling Base Lock Vice
Findmall 6 Lockdown Milling Machine Vise Bench Vise With Swiveling Base Lock Vice
Findmall 6 Lockdown Milling Machine Vise Bench Vise With Swiveling Base Lock Vice
Findmall 6 Lockdown Milling Machine Vise Bench Vise With Swiveling Base Lock Vice
Findmall 6 Lockdown Milling Machine Vise Bench Vise With Swiveling Base Lock Vice
Findmall 6 Lockdown Milling Machine Vise Bench Vise With Swiveling Base Lock Vice
Findmall 6 Lockdown Milling Machine Vise Bench Vise With Swiveling Base Lock Vice
Findmall 6 Lockdown Milling Machine Vise Bench Vise With Swiveling Base Lock Vice

Findmall 6 Lockdown Milling Machine Vise Bench Vise With Swiveling Base Lock Vice
Jaw Width: 6.3 Inch (160 mm) Jaw Opening: 6.3 Inch (160 mm) Bench Clamp Vise Height: 6 Inch (150 mm) Jaw Height: 2 Inch (50 mm) Base Swivel: 360º Clamping Force: 29 KN Max Gross Weight: 78 Lbs (35 Kg) Package Dimensions (L × W × H): 18" × 12" × 9" (46 × 31 × 23 cm) Vise Key: 15.875mm Table Slot Width, 18.00mm Base Width Accurate To 0.002" Per 4" On Squareness And 0.006" Per 4" On Parallelism Without Base And 0.008" Per 4 On Parallelism With Base. Findmall 6 Lockdown Milling Machine Vise Bench Vise W/ Swiveling Base Lock Vice. Each Pound Of Force In Horizontal Induces 1/2 Lbs Of Downward Force, Eliminating Jaw Tilt. This Vise Is So Designed That The Horizontal Force Generated By Tightening The Handle Pushes The Semi-Sphere Within The Movable Jaw And Thus Thrusts The Movable Jaw Downward. The Workplace Does Not Move Up, Even If It Is Held At The Top Of The Jaw Plates. It's Very Accurate And Durable. Sliding Surface Of The Vise Bed Is Flame Hardened And Ground.

Vise Bed Is Made From Grey Cast Iron And The Maximum Tensile Strength Of The Vise Bed Is 28,000 Psi. K Type Angle Lock Nut Is Made From The Highest Quality Ductile Iron, Firm And Durable. 1 × 6 Bench Vise With Base.

The Product Has Passed Strict Quality Testing. Durable And Easy To Install And Replace. Cost-Effective, The Best After-Sales Service.

Quality Assurance For Your Peace Of Mind. 6.3 Inch (160 mm). If there is any fault or problem with the product, please don't be shy to express it, we will solve it at the first time. Findmall AVR SE350 Automatic Voltage Regulator For Generator Electric Controller. Findmall 6 Ton Hydraulic Crimper Crimping Tool Wire Battery Cable Lug Terminal. 10 Pair 1/8" Steel Parallel Set 0.0002" Hardened 1/8" x 6" Suit Milling Thin New. Findmall AVR SX460 Automatic Voltage Volt Regulator Replacement For Generator.

16, 25, 50Ft Install Kit For Mini Split Heat Pump Systems. Findmall 6732901 6689371 Bottom Roller For Bobcat T590 T630 T650 250 T250H T300.

Findmall 1900003900 Thumb Cylinder 1900002900 For Takeuchi Mini Excavator TB290. Findmall Plain Bucket Attachment 600mm For 0.8ton-1ton 1.5ton Mini Excavator. Findmall 7196807 Drive Sprocket - 8 Hole Dual Speed For Bobcat T630 T740 T750.
Findmall 6 Lockdown Milling Machine Vise Bench Vise With Swiveling Base Lock Vice