Bodee Accu-AngLock Vise/Swivel Base for Milling Shaping and Drilling Machines

This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downwar. The workplace does not move up, even if it is held at the top of the jaw plates 2. Four setting positions of the jaw plates are available, widening the jaw plates opening 3.

It's very accurate and durable 4. The enclosed lead screw and sliding surface are harden and ground 5. Use highest quality ductile Iron 80000 PSI for minimum bending. Sliding surface of the vise bed is flame hardened and ground. Jaw Opening: 160mm (6-5/16") ; Jaw Height: 48mm (1-7/8"). Parallel and accurate within 0.01mm/100mm (0.00039" /3.9") , Squareness and accurate within 0.01mm/100mm (0.00039"/3.9"). Each pound of force in horizontal induces 1/2 lb of downward force, eliminating jaw tilt. Base Height : 1.5 2. Precision ground and hardened 4. Rotation axis is included 5. It's very accurate and durable. Premium quality swivel base and easy to read 0-360deg scales. Use highest quality ductile Iron. T Type Groove Diameter (d). 17 × 13.8 × 3.2 in.

Jaw Opening: 75mm (2 61/64") ; Jaw Height: 25mm (63/64"). Parallel and accurate within 0.01mm/100mm (0.00039" /3.9"), Squareness and accurate within 0.01mm/100mm (0.00039"/3.9"). Full 360° swivel base with graduation included. Each pound of force in horizontal induces 1/2 lbs of downward force, eliminating jaw tilt.

14.2 × 8.6 × 5.5 in. Jaw Opening: 110mm (4-5/16") ; Jaw Height: 29mm (1-9/64"). 16.2 x 10.25 x 6.3 in.

Jaw Opening: 160mm (4-3/4") ; Jaw Height: 48mm (1-37/64"). 16.9 x 10.2 x 5.9 in.